VTech Write It Right Computer Spezifikationen Seite 42

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 95
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 41
Hints on using 3-1/2" drive
Before you are going to use the 3-1/2" drive, there are some
basic concept and terminology you need to know.
A physical drive is a drive that
is
physically connected to the
computer.
A logical drive
is
a drive that can
be
accessed through the
"drive letter" assigned, e.g.
A:,
B:.
Thus there may be more logical drives than physical drives,
since two or more logical drives may refer to the same physi-
cal drive.
An
external drive
is
the drive that
is
created by
the"
file
CONFIG.SYS. The drive letter for that external drive
is
speci-
fied by assigning parameters on the CONFIG.SYS file. The
installation procedure of external drive
is
shown below.
Normally, after you have connected a
3.5"
micro floppy disk
drive to your computer, you can access the drive as usual.
However, you
will not be able to format a
3.5"
diskette with
720KB storage capacity. This
is
expected because DOS presumes
your drive
is
a 360KB, 5.25" drive. To use your 3.5 inch floppy
disk drive
as a 720KB drive, you should follow the procedures
below:
(A)
If
you are using
DOS
3.2
1.
Insert a DOS disk into drive
A.
2.
If
your
3.5"
disk drive
is
the second drive, create the
CONFIG.SYS file and include the following line:
drivparm
= /
d:1
Otherwise, change the parameter
"d:1"
to
"d:O."
41
Seitenansicht 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 94 95

Kommentare zu diesen Handbüchern

Keine Kommentare